Full Description
Map board and plastic cover to fit any Miry Clamp and Support both 2007 - 2015 and 2016 Onwards.
We sell the boards and clamps separately so you can have exactly the combination that suits you. If you haven't already done so you will need to add a Clamp and Support to your basket for a complete set up. It is also possible to have one clamp and multiple boards for different styles of riding.
The Miry Map Boards come in 2 styles, the SL (Super Load) and the WR (Water Resistant).
- The SL (super load) has four poppers at each corner which are all on the underside of the board so the plastic covers folds around each edge of the board. The two poppers on each side are on the top so that you can slide your map in and out easily from either side. This system works better for single sheets or maps which don't need to be folded very much.
- The WR (water resistant) is for cycle tourists. All the poppers are on the underside of the board so the plastic covers folds around each edge of the board. Your map is folded to the size of the board and then sealed in.
Both the SL and WR boards are available in 3 sizes; 10, 11 and 12 inch. The 10 board is a 10" square and so on. The larger the board, the more map you can see at once but the more room it takes up on your bars. The 11" is the most popular size.
There is also the A4 & A3 WR boards, which as the name suggests are A4 & A3 paper sized and only available in the WR version. Ideal for those who print maps out at home. This board has 2 holes drilled into it rather than one for the retaining bolt. This allows you to offset the board on your bars to make viewing a GPS or cycle computer easier.
Please Note: This product is the Map Board only. The Map Board Support can be purchased separately here.
| Size | Dimensions CM | Dimensions Inches | Suitable for |
|---|---|---|---|
| 10 WR | 25 x 25 cm | 10 x 10 inches | The most popular model. Suitable for cyclotourism, Adventure races, mapping, and in case of poor weather conditions, also for MTB-O. |
| A4 SL | 21.5 x 26.0 cm | 8.5 x 10.2 inches | MTBO racing model designed for A4 maps. |
| A4 WR | 21.5 x 26.0 cm | 8.5 x 10.2 inches | MTBO racing model designed for A4 maps. Weather resistant model for racing in poor weather. |
| 11 WR | 27.5 x 27.5 cm | 11 x 11 inches | Used for the same purposes as the 10WR model with the advantage of larger desktop. |
| 12 SL | 30 x 30 cm | 12 x 12 inches | MTBO racing model designed for Long distance and Scorelauf races on A3 maps. |
| 12 WR | 30 x 30 cm | 12 x 12 inches | Special competition model, for events where large working area is necessary. The best use is during Long distance, Scorelauf and Adventure races in poor conditions. |
| 13 WR | 33 x 33 cm | 13 x 13 inches | Special competition model, for events where large working area is necessary. The best use is during Long distance, Scorelauf and Adventure races in poor conditions. |
Reviews