Miry Map Board - Board and Plastic Cover
From £15.00

Map board and plastic cover to fit any Miry Clamp and Support.

We sell the boards and clamps separately so you can have exactly the combination that suits you. If you haven't already done so you will need to add a Clamp and Support (see related products below) to your basket for a complete set up. It is also possible to have one clamp and two boards for different styles of riding.

The Miry Map Boards come in 2 styles, the QL (Quick Load) and the WR (Water Resistant).

• The QL (quick load) is for adventure racers and bike orienteers. It has poppers along the bottom of the board on one edge and poppers on the top on the other 3 sides. This allows you to use a map which is bigger than your board without having the plastic cover sticking up. You can even popper through the map if it is thin enough. The map is protected from mud and rain by the plastic but it's not sealed in. Since maps for these events are either bagged or laminated this is not an issue.
• The WR (water resistant) is for cycle tourists. All the poppers are on the underside of the board so the plastic covers folds around each edge of the board. Your map is folded to the size of the board and then sealed in.

Both the QL and WR boards are available in 3 sizes; 10, 11 and 12 inch. The 10 board is a 10" square and so on. The larger the board, the more map you can see at once but the more room it takes up on your bars. The 11" is the most popular size.

There is also the A4 WR board, which as the name suggests is A4 paper sized and only available in the WR version. Ideal for those who print maps out at home. This board has 2 holes drilled into it rather than one for the retaining bolt. This allows you to offset the board on your bars to make viewing a GPS or cycle computer easier.

Weight -

210g