close

Black Diamond Ice Clipper

Price
£4.50

RRP £6.00, Save 25%

In Stock
Black Diamond Ice Clipper

Black Diamond Ice Clipper

The Black Diamond Ice Clipper is a specially designed racking crab for winter climbers to simplify the process of selecting, grabbing and placing screws.

The Clipper features a broad, flat bottom so that up to six screws, especially the Black Diamond Express, sit neatly together without snagging when you come to remove them. To remove a screw first pick the size you're after, then grab it and lift the other screws on the clipper to the top of the crab where they'll catch allowing you to simply pull the screw down to release. All this is easily done with either hand even in thick gloves.

An included rubber strap means that the Ice Clipper can be attached to virtually any harness. Some harnesses designed for winter climbing already have fabric slots in them to accommodate Ice Clippers.

Black Diamond's handy ice screw placing tips:

  • Use two Ice Clippers on each side of the harness offset from the gear loops
  • Rack your screws by length for the fastest access and to get the right length screw in the right placement
  • Rack quickdraws in the front and on both sides.
  • Be proficient at placing screws with either hand because the best placements won't always be on your strong side
  • Place cordelettes, extra long slings, belay screws and belay devices on your subordinate side around the back since you will most likely be standing on a ledge when accessing this gear
  • Your mission is to be able to place a screw and clip it in less than 1 minute.

Safety note: The Ice Clipper is not a full strength karabiner and will not hold bodyweight.

Weight:
30g





Customer Reviews of Black Diamond Ice Clipper

4 out of 54 out of 54 out of 54 out of 54 out of 5 from 5 Reviews

Write A Review. We'd love to get your feedback.


1 out of 51 out of 51 out of 51 out of 51 out of 5

Reviewer: giannis, Serres Greece  

A lot of times the wire of the gate gets out of its place an you drop your ice screws. And now with very litle force they broke... it's almost like they are made to fail...(so you 'll lose your ice screws and buy more...)


4 out of 54 out of 54 out of 54 out of 54 out of 5

Reviewer: John , Bangor  

I am not a climber but bought a BD couloir harness early season for glacier skiing. I went on a crevasse rescue course (recommended) and realised that I needed to carry more gear. The harness has only two gear loops but four clipper slots. I bought two clippers, one for each side, as recommended. I was unsure whether to buy the Black Diamond or Petzl but decided to stick with BD and its construction whilst light weight seems perfectly robust. When attached to the clipper slots this will give me the flexibility needed for carrying ice screws and other gear.


5 out of 55 out of 55 out of 55 out of 55 out of 5

Reviewer: Scott , Sutton Coldfield  

A great contender for racking screws. I use mine to rack both Petzl Laser Speeds and also Grivel 360 screws. The only problem I have, and it is not the Ice Clipper, is that my backpack waist strap sits on the Ice Clipper.


5 out of 55 out of 55 out of 55 out of 55 out of 5

Reviewer: stuart coupe, leeds  

The clippers fit nicely into the slots on my Arcteryx harness and I have used the included rubber device for extra security. I managed to get about 5 black diamond express screws on a clipper - any more, I felt would be risking a fumble getting one out.

Very easy to get the screws off the clipper and even easier to get them back on when seconding. Might be difficult to fit to a harness with a belt more than 7 cm wide. I have tried the Petzl flutes which I find bulky to carry and more awkward to get the screws into and out of. Sometimes the points of short screws got caught on my leg when stepping up.


4 out of 54 out of 54 out of 54 out of 54 out of 5

Reviewer: Nick Smith, UKClimbing.com  

A good clipper for racking ice screws one-handed, this should fit most harnesses even if they don't have dedicated ice clipper 'slots'. It comes with a rubber strip that goes on the inside of the harness waist belt, and is secure & comfortable.

I have 2 fitted to the Arc'teryx R320 harness, between the gear loops. If your harness has slots, the Petzl Caritool may be a better fit.

One problem with the Black Diamond model is the metal clip regularly pops out the wrong way, which means your screws can fall off the clipper. Perhaps a different plastic with less flex would help this.

Nick Smith, UKClimbing.com


Free Delivery

Free saver shipping for orders over £30, otherwise £1.95

Next Working Day £4.95

We offer a range of great value delivery options including free European shipping. More...

Facewest Rewards

Earn Great Discounts with our Reward Scheme

Earn Facewest reward credits on your order worth 5% of the order total. These can be redeemed off any future purchases. More...

Trusted by 1000's

One of the UK's most trusted Outdoor Retailers

Over 1000 reviews and a 99% rating from Trustpilot. More...

You might also be interested in these:


close